[m15x] Overclock Guide by markus

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • [m15x] Overclock Guide by markus

    ATTENTION, EVERYTHING TO YOUR OWN RISK


    You need the following 3 programms and my GPU Bios:


    nTune 5.05

    Nibitor 4.1

    NVFlash 5.13

    m15xopen.rom


    Step 1:

    Start Nibitor, read your GPU Bios and save it as "m15xorig.rom"

    [Blockierte Grafik: http://www.imgimg.de/uploads/Nibitor1cd07b725jpg.jpg]

    [Blockierte Grafik: http://www.imgimg.de/uploads/Nibitor2e17cf96djpg.jpg]

    [Blockierte Grafik: http://www.imgimg.de/uploads/Nibitor5eb060261jpg.jpg]


    [Step 2: (if you want to change the voltage to 1.00 volt)]

    Start Nibitor, and open the Bios file "m15xopen.rom"

    My Bios is already with 1.05 volt, if you´re not so sure about this, change the voltage back to
    1.00 volt, save it as m15xopen.rom

    [Blockierte Grafik: http://www.imgimg.de/uploads/Nibitor445836dbajpg.jpg]

    Step 3:

    Make a "Boot CD" (I did it with Nero, but you can do it with different programs)

    [Blockierte Grafik: http://www.imgimg.de/uploads/Nero10a4074e3jpg.jpg]

    Burn the 4 files on the "Boot CD".

    [Blockierte Grafik: http://www.imgimg.de/uploads/Nero24d786893jpg.jpg]

    Step 4:

    Please find out witch letter your DVD-Drive has! (i have g)

    Boot your m15x with the "Boot CD".

    Type in the next few steps as below:

    1. "g:"
    2. "nvflash -i0 -4 -5 -6 m15xopen.rom"
    3. he´ll ask you 3 times if you really want to do this, just hit the "y" ;)

    PLEASE MAKE SURE; THE LAPTOP IS PLUGED IN OR THE BATTERY IS FULL

    4. Wait 30 seconds, and when the "g:" is back on the screen, take the CD out and reboot!

    ATTENTION

    If anything is going wrong, you have to do this steps without display, so please brain the steps into your head, or write it exactly down!

    But if you follow exactly the guide, everything should be OK!
    XPS M1730 und M1330 ---> bye bye
    [m15x] - 1440x900 - Intel Core X9000- Geforce 8800M GTX - 4GB OCZ 800MHz - Hitachi 7K200 - Smart Bay Akku - Alien FX Keypad - Vista Ultimate 32bit
    :love:
  • Step 5:

    1. install nTune 5.05

    2. open the nvidia systemcontrol

    [Blockierte Grafik: http://www.imgimg.de/uploads/NVIDIAManager64912b22jpg.jpg]

    3.

    NOW, HAPPY OC :D

    Please try it step by step ... because every videocard has different limits!

    [Blockierte Grafik: http://www.imgimg.de/uploads/NVIDIAsystemcontrol01d690cajpg.jpg]

    To watch/check you speed open NVMonitor

    [Blockierte Grafik: http://www.imgimg.de/uploads/NVMonitor395596c9jpg.jpg]

    You also can save the profils on the desktop, so you don´t have to start the systemcontrol to switch the speed!

    [Blockierte Grafik: http://www.imgimg.de/uploads/NVIDIAsaveprofil93acb47ejpg.jpg]

    If the speed won´t change, please reinstall the graphic driver new!

    Oh .. IMPORTANT

    Please watch at the beginning the temps from your videocard!

    Very easy to watch the temps:

    [Blockierte Grafik: http://www.imgimg.de/uploads/Eventlogdd341363jpg.jpg]

    Start "eventlog"

    NOW, HAPPY OC
    XPS M1730 und M1330 ---> bye bye
    [m15x] - 1440x900 - Intel Core X9000- Geforce 8800M GTX - 4GB OCZ 800MHz - Hitachi 7K200 - Smart Bay Akku - Alien FX Keypad - Vista Ultimate 32bit
    :love:
  • ähm hab mal ne frage. Also soweit ging jetzt alles gut aber als ich dann die "Bootfähige CD" erstellen wollte, hab ich nero geöffnet und anstatt "kopieren und sichern " beim vorletzten punkt steht da nur " sichern" und es stehen auch nur 3 funktionen zur verfügung. Und es fehlt halt die funktion , in der man auswählen kann das man eine bootfähige cd erstellen möchte. 8|

    Habe mehrfach deinstalliert und installiert, keine änderung. Wisst ihr viell. worans liegen könnte, was ich machen kann oder ein alternatives programm um eine bootfähige cd zu erstelen?

    Achja, habe das original nero 7 verwendet, das beim m15x beigelegt war.
    danke schonmal :)
    mfg Julius
    Alienware Area 51 m15x -> Apple Macbook Pro 2,53 GHZ, 4 GB RAM, 320 GB Festplatte, 9600M GT
    Intel Core 2 Duo T9300
    4 GB RAM (3 erkannt)
    160 GB HDD
    nVidia Geforce 8800M GTX
    1440x900 pixel display
  • wenn du natürlich solche spässe mit deiner Karte machst, dann wundert es mich nicht, dass du Probleme hast........ ;)
    - Alienware m17x -
    Windows®7 ULTIMATE 64bit - Intel® Core™ 2 Extreme - 2,8 GHz - Dual GeForce® 8800M GTX - SLI® - 4 GB Dual Channel DDR2
    &
    DELL INSPIRON 9400

  • ne ne, das hat jetz doch nicht funktioniert:D..also ich meinte damit, das ich jetzt endlich mal eine "image datei" brennen kann. Das overclocken hab ich nicht hinbekommen.

    da steht ja das ich folgendes eingeben soll :

    " D: " (das ist mein laufwerksbuchstabe)
    "nvflash -i0 -4 -5 -6 m15xopen.rom"
    und am ende dann 3 mal y drücken.

    das problem ist aber, das er mir anstatt einem doppelpunkt dann i.ein zeichen macht, hat wahrscheinlich i.was mit amerikanischer tastatur zu tun. Was ist denn da jetz der " : "? und das " - " kann ich auch nciht schreiben, bekomme ich ebenfalls ein anderes zeichen ?(
    Alienware Area 51 m15x -> Apple Macbook Pro 2,53 GHZ, 4 GB RAM, 320 GB Festplatte, 9600M GT
    Intel Core 2 Duo T9300
    4 GB RAM (3 erkannt)
    160 GB HDD
    nVidia Geforce 8800M GTX
    1440x900 pixel display