ATTENTION, EVERYTHING TO YOUR OWN RISK
You need the following 3 programms and my GPU Bios:
nTune 5.05
Nibitor 4.1
NVFlash 5.13
m15xopen.rom
Step 1:
Start Nibitor, read your GPU Bios and save it as "m15xorig.rom"
[Blockierte Grafik: http://www.imgimg.de/uploads/Nibitor1cd07b725jpg.jpg]
[Blockierte Grafik: http://www.imgimg.de/uploads/Nibitor2e17cf96djpg.jpg]
[Blockierte Grafik: http://www.imgimg.de/uploads/Nibitor5eb060261jpg.jpg]
[Step 2: (if you want to change the voltage to 1.00 volt)]
Start Nibitor, and open the Bios file "m15xopen.rom"
My Bios is already with 1.05 volt, if you´re not so sure about this, change the voltage back to
1.00 volt, save it as m15xopen.rom
[Blockierte Grafik: http://www.imgimg.de/uploads/Nibitor445836dbajpg.jpg]
Step 3:
Make a "Boot CD" (I did it with Nero, but you can do it with different programs)
[Blockierte Grafik: http://www.imgimg.de/uploads/Nero10a4074e3jpg.jpg]
Burn the 4 files on the "Boot CD".
[Blockierte Grafik: http://www.imgimg.de/uploads/Nero24d786893jpg.jpg]
Step 4:
Please find out witch letter your DVD-Drive has! (i have g)
Boot your m15x with the "Boot CD".
Type in the next few steps as below:
1. "g:"
2. "nvflash -i0 -4 -5 -6 m15xopen.rom"
3. he´ll ask you 3 times if you really want to do this, just hit the "y"
PLEASE MAKE SURE; THE LAPTOP IS PLUGED IN OR THE BATTERY IS FULL
4. Wait 30 seconds, and when the "g:" is back on the screen, take the CD out and reboot!
ATTENTION
If anything is going wrong, you have to do this steps without display, so please brain the steps into your head, or write it exactly down!
But if you follow exactly the guide, everything should be OK!
XPS M1730 und M1330 ---> bye bye
[m15x] - 1440x900 - Intel Core X9000- Geforce 8800M GTX - 4GB OCZ 800MHz - Hitachi 7K200 - Smart Bay Akku - Alien FX Keypad - Vista Ultimate 32bit
[m15x] - 1440x900 - Intel Core X9000- Geforce 8800M GTX - 4GB OCZ 800MHz - Hitachi 7K200 - Smart Bay Akku - Alien FX Keypad - Vista Ultimate 32bit